INST-626
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
Rev.A
the computer.
INSTALLATION INSTRUCTIONS
Product
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
*These instructions are for the docking station only. For instructions on features, set-up
Revision
Printing Spec:
PS-001
Docking Staton - Getac B300 USB 3.0
Form
7160-0526-02 Dual RF
warranty.
Opening the power/port replication housing will void the product
docking station.
There are no adjustments required at any time of the electrical components within the
and service of aftermarket vehicle equipment.
of automotive electrical procedures and systems, along with proficiency in the installation
To properly install a Gamber-Johnson docking station you must have a good understanding
important to read and follow all instructions before installing this product.
Safety is dependent on the proper installation and servicing of this docking station. It is
7160-0526-00 No RF
IMPORTANT SAFETY INFORMATION for
each individual product.
systems. Installation instructions for other Gamber-Johnson products are provided with
This docking station is designed to be used with a variety of Gamber-Johnson mounting
**
and operation of the B300 computer, please refer to the manuals provided by Getac with
© Copyright 2014 Gamber-Johnson, LLC
INSTALLERS
Page 1 of 8
7160-0526-00 & 7160-0526-02 Docking
Stations are only compatibile with 3rd, 4th
& 5th generation Getac B300 computers.
Computers can be identified by the p/n
found on the bottom.
3rd generation (B300-H) 52628417xxxx,
4th generation (B300-G4) 52628540xxxx,
5th generation (B300-G5) 52628591xxxx.
1st generation 52628144xxxx &
2nd generation (B300-X) 52628317xxxx
computers are not compatible.
