background image

 

86

 

System Recovery 

Using Windows RE 

Windows 10 has a recovery environment (Windows RE) that provides 

recovery, repair, and troubleshooting tools. The tools are referred to as 
Advanced Startup Options. You can access these options by selecting 

 

 

Settings 

 Update & security

. There are several choices: 

 

System Restore

 

This option allows you to restore Windows to an earlier point in time if 
you have created a restore point. 

 

Recover from a drive

 

If you have created a recovery drive on Windows 10, you can use the 
recovery drive to reinstall Windows. 

 

Reset this PC

  

This option allows you to reinstall Windows with or without keeping 
your files. 

See Microsoft website for more information. 

NOTE: 

 

If you are in a situation where your computer won’t boot into Windows, you 

can access the Advanced Startup Options by running the BIOS Setup Utility 

and selecting 

Advanced

 

 

Windows RE

 

System recovery for Windows 10 typically will take several hours to 

complete. 

 

 

 

 

 

Using Recovery Partition 

When necessary, you can restore your Windows 10 system to the factory 

default state by using the “recovery partition” feature. Recovery partition is 

Summary of Contents for V110























































































































Reviews: