26
Labels
Label Explanation
Symbol Explanation
Battery Label
States safety and environmental
information for the battery.
Identification
Label
States the product identification;
serial number, year and month of
manufacturing.
For example, 1402XXXXX where
“14” states manufacturing year,
“02” states manufacturing month
and “XXXXX” states serial
number.
Data Label
States technical performance and
requirements, e.g. the Input Power,
Input Voltage and maximum
Patient Weight etc.
Tested with
Weight Label
States the date and the weight that
was used when validating the
product.
SWL
Safe Working Load (max total
load)
Total mass of equipment including
its safe working load.
Lifting stroke
Supply voltage
24V DC
Supply voltage
MAX: 150 VA
Maximum power
Fuse FA - F10AL 250V
IP X4
Degree of protection
(i.e. the product is protected
against splashing water)
NDA0100-XX
Product no. of the battery
ED max 10%
Mode of operation for Hi/Lo
function:
ED maximum 10%;
Maximum 1 minute ON;
Minimum 9 minutes OFF
+
=
kg / lb
SWL
Type B, applied part: protection
against electrical shock in
accordance with IEC 60601-1.
Read the
IFU
before use.
Separate electrical and electronic
components for recycling in
accordance with the European
Directive 2012/19/EU (WEEE)
A battery is the power source of
this equipment.
Environmental danger - contains
lead.
Not for disposal.
Recyclable
CE marking in accordance with
the Medical Devices Directive
93/42/EEC.
Classified by Underwriters
Laboratories Inc. with respect to
electrical shock, fire, mechanical,
hazards and other specified
hazards only in accordance with
the Approvals and List of
Standards
Name and address of the
manufacturer
Manufacturing date
Pb
