4
Flusher disinfector S-406
Installation
9904
Fig. 1. Fitting the support legs
Fixation in wall
• Fix the disinfector on the wall bracket supplied with the machine. If the wall
does not provide good support, use a wall fixture or support legs (both of
which can be ordered from Växjö Rostfritt). Ensure that the machine is in
level.
N.B.
If a wall fixture is used, this must be put into position when the
wall is being built up.
• Drill holes for the securing screws for the wall bracket as per figure 2.
Installation
The disinfector may be placed in a free-standing position on four legs or mounted
on a wall in a special wall bracket.
To facilitate cleaning, a lateral distance of 100 mm to an adjacent wall or other
equipment is recommended. If the disinfector is installed next to a sink unit or
worktop, a lateral distance of 40 mm is recommended.
Wall-mounted models have a transport stay which should be removed.
Free-standing position
Screw the legs securely into the four corners of the support frame. Adjust with the
adjusting screws until the disinfector stands level and firm.
Fig. 2. Hole pattern for wall bracket.
V060
Adjusting
screw
Leg
235,5
235,5
179,5
179,5
350
806
900
Wall bracket
Wall
V061
470
Wall fixture
4685140-00
V116
