CLEANING AND MAINTENANCE
Clean all detachable parts after each use in hot, sudsy
water.
Wipe the product’s exterior surface with a soft, damp
cloth to remove stains.
Water droplets may buildup in the area above the funnel
and drip onto the product base during brewing. To con-
trol the dripping, wipe off the area with a clean, dry cloth
after each use.
Use a damp cloth to gently wipe the keeping warm plate.
Never use abrasive cleaner to clean it.
Clean all parts and keep for next use.
CAUTION:
Be sure to unplug this appliance before cleaning.
To protect against electrical shock, do not immerse cord,
plug or unit in water or liquid. After each use, always make
sure plug is first removed from wall outlet.
1.
2.
3.
4.
5.
4.
5.
6.
7.
8.
9.
Insert the plug into the outlet.
Press ON/OFF switch to the “I” position, the indicator
will illuminate and the appliance will start to work.
The brewing process can be interrupted by pressing
switch to the “O” position at any time. The appliance will
continue brewing once the switch is pressed to the “I”
position.
Note:
you can take out carafe, pour and serve at any
time. The appliance will stop dripping automatically. But
the time cannot exceed 30 seconds.
Remove out carafe to serve when finish brewing (about
one minute later after the coffee stops dripping out.)
Note:
The coffee you get will less than the water you have
added, as some water is absorbed by coffee powder. DO
NOT touch cover, keeping warm plate and so on when
operating as they are very hot.
When the process is finished, if you do not want to serve
immediately, keep the coffee maker is energized, the
coffee can be kept warm in the keeping warm within 2
hours. For an optimum coffee taste, serve it just after
brewing.
Always turn the coffee maker off and disconnect the
power supply when not use.
Note:
Pay attention to pour the coffee out, otherwise you
may be hurt as the temperature of coffee just finished is
high.
