18
17
Firstly, to reset the MILK FROTHING Button
❸.
Secondly, press the BREWING ESPRESSO
button ❷. The appliance will begin to pump
water. Place a cup on cup shelf ⓫. There will
some water flow out.
Thirdly, place a cup under the steam wand
❾ . Turn on the steam control knob ⓱ to
the steam steam icon for better pump the
water from the boiler quickly.
Fourthly, the steam wand ⓳ begin to flow
water out continuously, it means the boiler
in the coffee maker have enough water to
continue making milk foam. Then, turn the
knob ⓱ back to "START/STOP" to stop and reset the BREWING ES-
PRESSO button ❷ . Now you can froth milk again.（Please refer to
the 5.3 HOW TO MAKE MILK FOAM.）
After making the froth milk through the steps above (5.3 HOW TO
MAKE MILK FOAM ), the appliance’s power indicator ❹ light keep
red fixed, other indicator’s light don’t light up. Because the temp-
erature is too high to brew coffee after milk frothing. It is necessary
to cool down the machine firstly. Then we could continue to brew
espresso. You can refer to the following steps.
（1）After you have frothed milk about 2-3
times, you have turned the steam control
knob ❹ back to the “START/STOP” position.
Maybe you will find the appliance’s steam
function indicator don’t light up and the power indicator keep red light.
Because the temperature is too low for the
steam function, we need to wait until steam
function indicator ❻ is illumanited again,
then continue to froth milk.（Please refer to
the 5.3 HOW TO MAKE MILK FOAM.）
（2） After you have frothed milk about 3-4 times, the steam will become
weaker because the boiler is run out of water and there is not enough
water for the steam function. So you need to pump the water into the
boiler.
5.3.2 TIPS FOR HOW TO CONTINUE FROTHING
5.3.3 BREW ESPRESSO AFTER MILK FROTHING (FOR LATTE)
(1)Reset the MILK FROTHING button ❸. The
appliance’s espresso function indicator ❺
light will green.
30
100
180
30
100
180
30
100
180
30
100
180
30
100
180
