28
27
STEAM
INSERT
Steam wand Remains Blocked
1. Unscrew the Froth nozzle and soak overnight in
the Milk Pitcher with warm water & one Espresso
Machine Cleaning Tablet.
2. In the morning rinse the Pitcher & Froth nozzle
under running water ensuring all traces of the
cleaning tablet have been removed.
3. Use the thicker 'Steam' Cleaning needle to clean
the Froth nozzle.
4. Ensure transparent O—ring is present &
undamaged.
5. Screw the Froth nozzle back into the Steam
wand ⓰ Arm.
6. Run Hot Water through the Steam wand ⓰ for
40 seconds.
Cleaning Steam Wand
• Every Time
1. After frothing milk, purge the Steam wand ⓰ by
turning the steam/water knob ⓮ to " " for just
1—2 seconds.
2. Wipe the Steam wand ⓰ with a damp cloth.
• 2—3 Months
1. Soak the Steam wand ⓰ overnight in the Milk
Pitcher with warm water.2. In the morning remove
the Pitcher and rinse ensuring that all traces of the
solution have been removed.
3. Wipe Steam wand ⓰ with a damp cloth ensuring
that all traces of the cleaning tablet have been
removed.
Note:Contact Gevi should you think that the filter holder seal
needs replacing. Do not attempt to change the Silicone Seal with
out first consulting Gevi.
If the Froth nozzle becomes clogged with milk resi-
due:
1. Insert the thicker 'STEAM' Cleaning needle(Not i-
ncluded) up the Froth nozzle hole and remove.
2. Run Hot Water through the Steam wand ⓰ for 4-
0 seconds.
Unblocking Steam Wand
— Over time this Seal loses its elasticity and may require replacement. The
seal may need replacing when watery espresso leaks from around the po-
rtafilter handle during extraction, or if the portafilter handle is loose when
fully turned to the centre position.
UNSCREW
4. Run Hot Water through the Steam wand ⓰ for 40
seconds.
