(3)Place corresponding espresso cup on
cup shelf ⓲.
(4)Make sure the steam/water knob ⓮ is
in a horizontal position (off-position).
(5)Plug in.
(6) Press the power button ❶. The power
button ❶ start to blink blue light slowly,
other buttons do not light up. The applia-
nce will start heating.
Note: The appliance is not equipped
with any jug, please use your jug or cof-
fee cup.
(7)When 4 button’s light keep blue fixed,
the appliance pass to ready condition.
(8)Make one cup of espresso: Press single
cup button ❷, the single cup button ❷
will blink white light slowly. After a while,
coffee will flow out.
(9) Make two cups of espresso: Press dou-
ble cup button ❸, the double cup button
❸ will blink white light slowly. After a
while, coffee will flow out.
(10) The appliance will automatically stop
working when the coffee-brewing is finished.
Your coffee is ready now. All 4 button’s light
keep blue fixed, you can operate other
functions.
10
9
Safety advise: If during the coffee
brew, you rotate the steam/water knob
⓮ in the on position, the appliance will
stop to brew but from the steam wand
⓰ will flow hot water. Must remember
not to do this because the hot water can
burn you or people around you.