KNOW YOUR BARBEQUE GRILL
CONTROL PANEL
CONTROL PANELDESCRIPTION
OPERATION DESCRIPTION
：
●
INITIAL USE
●
ASSEMBLE THE ROASTING TRAYS
clamps near the hinge and push down the front end of tray with a
little force to snap the tray into place. Then close the grill, just pull
the handle toward you directly.
Unpack the package, take out all the accessories and clean them
according to the section of “CLEAN AND MAINTENANCE”.
Normally, the grill is opened at an angle of 105 degree .The top
roasting tray can be level with the bottom roasting tray to create a
large cooking surface and assemble the top roasting tray. First
open the grill to a angle which is less than 105°, then push the
pushing knob upward with the other hand and hold the handle
with one hand to open the grill to 180°. Insert the trays into the
Plug the cable power plug.
Press the power on key to start the machine: the LED screen
lights up the food category display. Press power switch button
and LCD screen will display and show food function.
The whole menu on the panel is displayed in white . Rotate the
dial knob to select the menu function you want. After the menu
function is selected, its pattern changes from white to blue.
Press the OK button to start, and the selected menu pattern
will be permanently lit in blue, other menu patterns will not
1.
2.
3.
Electrical parameters: 120V ~ 60Hz 1800W
Left pole
Release Button of
upper cooking plate
Right Pole
handle
LED display screen
ON/OFF button
OK button Dial knob
upper cooking
plates
lower cooking
plates
180°angle
button
Switch Chicken Sausage Red meat Fish Panini
Burge Defrost Flat open OK button Dial knob
