BOIL-DRY PROTECTION
Should you accidentally let the kettle operate without water,
the function of boil-dry protection will automatically switch off
the power. If this occurs, allow the kettle to cool prior to filling
with cold water before re-boiling.
CLEANING AND MAINTENANCE
Always disconnect the appliance from the power outlet and
cool it down completely before cleaning.
Never immerse the kettle, power cord or power base in
water, or allow moisture to contact with these parts.
Wipe the appearance of body with a damp cloth or cleaner,
never use a poisonous cleaner.
Remember to clean the filter at intervals. For easier
cleaning, detach the filter by pressing down the tab of filter
inside the kettle and then replace it after cleaning.
CAUTION:
Do not use chemical, steel, wooden or abrasive
cleaners to clean the outside of the kettle to prevent the
gloss loss.
When not use or storage, the power cord may be wind
under the bottom of kettle.under the bottom of kettle.
1.
2.
3.
4.
5. Lift the kettle from the power base and then pour the water.
NOTE:
Operate carefully when pouring the water from your kettle
as boiling water may result in scald, besides, don’t open the lid
while the water in the kettle is hot.
6. The kettle will not re-boil until the switch is pressed again. The
kettle may be stored on the power base when not in use.
NOTE:
Always disconnect the power supply when not use.
