②
④
⑥
①
③
⑤
Nugget Ice Maker
GET YOUR ICE MAKER READY
5
FAQs
- Keep flashing when the ice maker is plugged in, glow solidly during ice making.
- Glow white when the water supply is not enough to continue making ice.
- Glow white when the ice maker is running self-cleaning program.
- Glow white when the ice basket is full.
Clean
On/Off
Control Buttons
Indicators
- Press to turn the ice maker on or off.
- Press and hold for 3 seconds to enter self-cleaning program.
It’s normal for the ice maker to generate some heat during working, especially when it has kept
working for a long time.
5.Heat Generation
4.Sounds Made by Ice Maker
The ice maker is designed to work quietly but will make some sounds during operation.
3.Water Flowing During Ice Making
Every time the ice maker starts making ice or water is refilled.Water flows through the ice
chute into water reservoir, this is to cool the water. Water will stop flowing when its
temperature is low enough to form ice.
2.Time of Ice Making
Time of ice making is affected by the ambient and water temperature. (Refer to page 6 for
temperature range.) The first ice comes out between 15 and 30 minutes. Usually, it takes 3-4
hours to fill the ice basket.
Every Gevi Ice Maker goes through a running test before leaving the plant, so it’s normal to
find water residue in water reservoir or drain hoses. Run self-cleaning program twice with
fresh water before first use.
1.Water Residue Found
Know Your Ice Maker
②
④
⑥
①
③
⑤
