12
Tip 3:
Some transmitters have a very weak IR-signal which makes it difficult to
replicate the IR-signal. Do as follows to check how strong the IR-signal is:
1.
Press
P
and
1
at the same time. The indicator light
A
flashes red.
2.
Press any key on the original remote control to check that the indicator light
B
flashes green. Move the original transmitter backwards until the indicator
light stops flashing.
3.
Halve the distance where the indicator light stops flashing. Now the original
transmitter has the correct distance. Continue from point 3 in the section
“Learn IR codes from another remote control”.
B
P
A
