13
Marking label
Keyguard
Digits
Marking label
Keyguard
Digits
Resetting Control TV to factory setting
With Control TV it is possible to reset all keys
to factory setting. All learnt IR codes will be
erased.
1.
Remove the keyguard and pull out the
labelling until the key digits show.
2.
Press
P
and key
3
at the same time
.
3.
Press key
9, 1, 2, 3, 10
in sequence.
Setting beep volume
Control TV has a beep signal which sounds when a key is pressed. It is possible
to switch on/off the volume
Do as follows:
1.
Remove the keyguard and pull out the
marking label until the key digits show.
2.
Press
P
and key
4
at the same time. The
sound is switched off/on alternately.
Cleaning
To clean Control TV wipe with a damp cloth (weak solution of washing up
liquid). Wipe dry after cleaning.
