52
|G3 – Owner’s Manual
10
TRIGGER
SET
In the "Trigger Set" mode, you select the pad triggers (drum sensors) and you can make settings. The G3 drum module
can be adjusted to your personal, individual playing style.
When you make changes to a preset, they are automatically saved. You will also find an asterisk
[*]
next to
the trigger setup name. If you want to save your settings in your own preset, then you can do this under:
[TRIGGER SET] -> [F1] Settings -> [F2] Preset.
TRIGGER SET
Trigger Set
The first level shows all
input channels
. In the top line, you
see the loaded trigger preset
Load and save
In contrast to the instrument level, the trigger settings are
saved automatically. If you want to additionally save and
name the settings as a separate preset, you can do this in
the submenu: [
Setup]
[Preset]
An [*] indicates that you have made changes.
Select channel
The middle
row
shows all
trigger inputs
. The inputs corre-
spond to the sockets on the back of the unit.
The active input is indicated by a highlighted letter.
Select the channel
with the dial
[5] [<INPUT>].
Select zone
The
lower row
shows all
zones
accessible at the active
input. When the input is changed, the component icons are
updated according to the trigger bank type assigned to the
input channel (drums, cymbals or hi-hat).
Change the zone
with the dial
[6] [<ZONE>].
This
example
shows the activated bow compo-
nents of Hi-Hat input.
Auto On
Turn the dial
[7]
to enable/disable automatic channel detection. Play a component on your drum kit and the module
will automatically show you the channel that was played.
Settings
Pressing
[F1]
takes you to a selection of parameters that allow you to customise your G3 module to your own playing
style. For more information, see the following chapter.
Setup
With the
[F2]
"Setup" key you can directly access the selection of triggers and their presets.
HH-Calib.
Press
[F3]
key to calibrate your hi-hat.
