72
|G3 – Owner’s Manual
11.2.1
A
MBIENT
MENU
[F3]
[F1]
Ambient
The Ambience module contains
room recordings
made in
the
Berlin Funkhaus studios
. Since a room reacts to moving
air in a characteristic and consistent way, the possibilities of
the parameters are limited by the type of effect.
Ambience controls the time it takes for sound to bounce off
an obstacle, resulting in an echo. The effect is designed to
have a global effect on the sound of the kit, which follows
the assumption that the entire kit is placed in the same
room or environment. However, it is possible to adjust the
volume of the effect for each pad using the FX Send mixer,
which allows you to turn the effect off by dragging the
control for the desired pad all the way down.
The following setting options are available:
Select the corresponding parameter with the dial
[5]
or the
navigation keys
[8]
and change it with the dial
[7],
the
navigation keys
[8]
or the
[+]
and
[-]
keys.
Level
Adjust the volume/level of the effect (globally).
Pre-Delay
Time difference of sound waves, between the direct path from the signal source to the auditory system and the first
reflection through obstacles (e.g. walls) to the auditory system.
Switching the effect on / off
Use the dial
[6]
and switch to
[on]
or
[off]
.
Exit the level
Press
[F3]
to
exit
the level or any menu key to
exit
the entire menu.
