8
4 "Main line"
menu (Coupler)
The
Main line
menu contains the parameters used to define the rules for forwarding telegrams from the main
line to the sub line.
The basic structure of the menu is as follows:
Fig. 4.1
4.1 Parameters
4.1.1 Configuration
This parameter can be used to select the rule for forwarding telegrams from the main line to the sub line from
a preset list of rules; based on the selection made, the subsequent parameters are configured as a result;
The values that can be set are:
-
groups: filter physical: block
-
groups, physical: filter
(default value)
-
groups: route, physical: filter
-
groups, physical: route
-
configure
by selecting
configure
, all the other parameters present in the configuration menu will be configurable. If any
of the other values is selected, the parameters can be consulted but their value is preset and cannot be
changed.
4.1.2 Group telegrams
This parameter is used to define the rule for forwarding telegrams whose recipient has a group and main
group address between 0 and 13 (e.g. 0/x/x, 1/x/x … 13/x/x); The values that can be set are:
-
transmit all (for testing only)
all telegrams are forwarded
-
block
no telegrams are forwarded
-
filter
(default value)
only the telegrams with an address present in the filter table are forwarded; remember that ETS
automatically generates the filter tables for each coupler