100-167 Rev. B
Release Date: 10/29/18
Page
2
of
9
Product Specifications and Usage Information
P4400
GENESYS 30 Spectrophotometer
PRODUCT PHOTO
Thermo Scientific GENESYS 30 Spectrophotometer
Included Components:
•
Plastic insert plate with cuvette holder
•
USB thumb drive
•
Power cord
•
USB interface cord
Packaging:
Unit is shipped in a cardboard box with a form-fitting foam enclosure.
Storage:
Store the instrument in a cool and dry location.
INSTALLATION
Please refer to the
Thermo Scientific GENESYS 30 Spectrophotometer User Guide
for explicit detail. Information supplied herein
should be considered supplemental or redundant and is specific to usage for dosimetry in radiation processing applications.
CAUTION!
- Whenever the spectrophotometer has been stored or shipped, immediate exposure to room air can cause
condensation damage. Move the shipping cartons to the installation location at least 24 hours before installation. This allows
the instrument to equilibrate at room temperature before the shipping cartons are opened and protective packaging is
removed.
Unboxing:
After at least 24 hours, open the shipping box and remove the documentation packet and USB thumb drive. Remove the
instrument from its shipping box.
Operating Environment:
Instrument was designed for use under the following conditions:
Temperature Range*
5°C to 35°C (41°F to 95°F)
Relative Humidity
<20% to 80% noncondensing
Altitude
0m to 200m
*Operating the instrument outside of this temperature range may cause permanent damage.
