background image

IQ lock AUT, EL / EL DL, EM / EM DL, C / C DL, M / M DL

39

Installation

4.7  Sliding door fittings

The sliding door fittings that are listed in the approval in accordance with DIN EN 179 and 1125 may be combined 

with the GEZE self-locking panic locks.

Stop direction for lever lock IQ lock EM/IQ lock EM DL

Outward

-opening:

DIN 

right

Outward

-opening:

DIN 

left

Inward

*-opening:

DIN 

right

Install IQ lock EM DIN left

Inward

*-opening:

DIN 

left

Install IQ lock EM DIN right

Permanently engaged door handle

Electronically engageable door handle

* Subject to approval in connection with emergency exits

4.8  Function checks after installation of the mechanical components

After mounting, the following functions or installation states have to be ensured:

 

à

The door seals used must not have a negative influence on the proper function of the panic exit device.

 

X

Ensure that the door can be opened freely when the panic exit device is operated.

 

à

In the case of doors that cannot be opened wider than 90° a Class 2 panic exit device (normal projection) has 

to be used.

 

à

Check whether glass elements at panic exit devices are equipped with safety glass or laminated safety glass.

 

à

Panic exit devices are not designed for use on double action doors.

 

X

Check whether all the planned keepers (closing recess, etc.) or claddings are installed. Compliance with DIN EN 179 

or DIN EN 1125 must be guaranteed.

 

X

Check whether a sign with the text “Press against bar to open” or a pictogram (see illustration below) is at-

tached to the inside of the door immediately above the horizontal bar or on the bar itself, providing there is a 

sufficiently large and level surface available for the required text.

  

 

à

The area of the pictogram should be at least 8,000 mm². The colours should be white on a green background.

 

à

After installation the arrow must point to the operating element.

Summary of Contents for IQ lock AUT





















































Reviews: