Powerturn
7
Description
3
Description
3.1 Types of installation and versions
à
The door drive unit can be mounted in transom mounting at the lintel or in door leaf installation on the door leaf.
à
The door drive is available as 1-leaf or 2-leaf version.
à
The Powerturn F-IS and Powerturn F-IS/TS systems can only be mounted in transom installation.
3.2 Set-up
The door system shown is only a schematic diagram.
For technical reasons, we cannot show all of the possibilities here.
The operating elements can be arranged individually.
Example: Door drive Powerturn, 1-leaf, transom installation
1
Door drive unit
2
Link arm or roller guide rail
3
Smoke switch control unit
2)
4
Activation device outside (KA)
(optional)
5
Activation device authorised (KB)
(optional)
6
Smoke switch
2)
7
Activation device inside (KI)
(optional)
8
Programme switch
(optional)
9
Key switch for enabling the programme switch
(optional)
10
Emergency stop button
(optional)
11
Circuit breaker “CLOSE DOOR”
2)
12
Electric strike
(optional)
13
Door handle with door lock
(on site)
14
Inside building
15
Outside building
16
Closing safety sensor (SIS)
(optional)
17
Door transmission cable
(optional)
18
Opening safety sensor (SIO)
(optional)
19
Reset switch
20
Socket for service adapter ST 220 and Bluetooth adapter
21
Operating modes push button with operating
modes display
2)
optional, in conjunction with Powerturn F
