background image

Germany

GEZE Sonderkonstruktionen GmbH
Planken 1
97944 Boxberg-Schweigern
Tel. +49 (0) 7930-9294-0
Fax +49 (0) 7930-9294-10
E-Mail: sk.de@geze.com

GEZE GmbH
Niederlassung Nord-Ost
Bühringstraße 8
13086 Berlin (Weissensee)
Tel. +49 (0) 30-47 89 90-0
Fax +49 (0) 30-47 89 90-17
E-Mail: berlin.de@geze.com

GEZE GmbH
Niederlassung West
Nordsternstraße 65
45329 Essen
Tel. +49 (0) 201-83082-0 
Fax +49 (0) 201-83082-20
E-Mail: essen.de@geze.com

GEZE GmbH
Niederlassung Mitte
Adenauerallee 2
61440 Oberursel (b. Frankfurt)
Tel. +49 (0) 6171-63610-0
Fax +49 (0) 6171-63610-1
E-Mail: frankfurt.de@geze.com

GEZE GmbH
Niederlassung Süd-West
Breitwiesenstraße 8
71229 Leonberg
Tel. +49 (0) 7152-203-594
Fax +49 (0) 7152-203-438
E-Mail: leonberg.de@geze.com

GEZE GmbH
Niederlassung Süd-Ost
Parkring 17
85748 Garching bei München
Tel.: +49 (0) 89-120 07 42-50
Fax.: +49 (0) 7152-203-77050

GEZE Service GmbH NL Süd-West
Reinhold-Vöster-Straße 25
71229 Leonberg
Tel. +49 (0) 7152-9233-34

GEZE Service GmbH NL Nord-Ost
Bühringstraße 8
13086 Berlin (Weissensee)
Tel. +49 (0) 30-470217-32

GEZE Service GmbH NL West
Nordsternstraße 65
45329 Essen
Tel. +49 (0) 201-8 30 82 16

GEZE Service GmbH NL Mitte
Feldbergstraße 59
61440 Oberursel (b. Frankfurt)
Tel. +49 (0) 6171-63 327-0

GEZE Service GmbH NL Süd
Parkring 17
85748 Garching bei München
Tel. +49 (0) 89-120 07 42-0

Austria

GEZE Austria GmbH
Wiener Bundesstrasse 85
A-5300 Hallwang
Tel. +43/6225/87180
Fax +43/6225/87180-299
E-Mail: austria.at@geze.com

BalticXStates

GEZE GmbH Baltic States office
Dzelzavas iela 120 S
1021 Riga
Tel. +371 (0)  67 89 60 35
Fax +371 (0) 67 89 60 36
E-Mail: office-latvia@geze.com

Benelux

GEZE Benelux B.V.
Steenoven 36
5626 DK Eindhoven
Tel. +31-(0)40-26 290-80
Fax +31-(0)40-26 290-85
E-Mail: benelux.nl@geze.com

Bulgaria

GEZE Bulgaria - Trade 
Representative Office
61 Pirinski Prohod, entrance “B”, 
4th floor, office 5, 
1680 Sofia
Tel. +359 (0) 24 70 43 73 
Fax +359 (0) 24 70 62 62
E-Mail: office-bulgaria@geze.com

China

GEZE Industries (Tianjin) Co., Ltd.
Shuangchenzhong Road
Beichen Economic Development
Area (BEDA)
Tianjin 300400, P.R. China
Tel. +86(0)22-26973995-0
Fax +86(0)22-26972702
E-Mail: Sales-info@geze.com.cn

China

GEZE Industries (Tianjin) Co., Ltd.
Branch Office Shanghai
Unit 25N, Cross Region Plaza
No. 899, Ling Ling Road, 
XuHui District
200030 Shanghai, P.R. China
Tel. +86 (0)21-523 40 960
Fax +86 (0)21-644 72 007
E-Mail: chinasales@geze.com.cn

China

GEZE Industries (Tianjin) Co., Ltd.
Branch Office Guangzhou
Room 17C3
Everbright Bank Building, No.689
Tian He Bei Road
510630 Guangzhou, P.R. China
Tel. +86(0)20-38731842
Fax +86(0)20-38731834
E-Mail: chinasales@geze.com.cn

China

GEZE Industries (Tianjin) Co., Ltd.
Branch Office Beijing
Room 1001, Tower D
Sanlitun SOHO
No. 8, Gongti North Road,
Chaoyang District,
100027 Beijing, P.R.China
Tel. +86-(0)10-5935 9300
Fax +86-(0)10-5935 9322
E-Mail: chinasales@geze.com.cn

France

GEZE France S.A.R.L.
ZAC de l’Orme Rond
RN 19
77170 Servon
Tel. +33-(0)1-606260-70
Fax +33-(0)1-606260-71
E-Mail: france.fr@geze.com

Hungary

GEZE Hungary Kft.

Bartók Béla út 105-113.

Budapest

H-1115

Tel. +36 (1) 481 4670

Fax +36 (1) 481 4671

E-Mail: office-hungary@geze.com

Iberia

GEZE Iberia S.R.L.

Pol. Ind. El Pla

C/Comerc, 2-22, Nave 12

08980 Sant Feliu de Llobregat 

(Barcelona)

Tel. +34 9-02 19 40 36

Fax +34 9-02 19 40 35

E-Mail: info@geze.es

India

GEZE India Private Ltd.

MF2 & 3, Guindy Industrial Estate

Ekkattuthangal

Chennai - 600 097

Tamilnadu

Tel. +91 (0) 44 30 61 69 00

Fax +91 (0) 44 30 61 69 01

E-Mail: office-india@geze.com

Italy

GEZE Italia S.r.l

Via Giotto, 4

20040 Cambiago (MI)

Tel. +39(0)29 50 695-11

Fax +39(0)29 50 695-33

E-Mail: italia.it@geze.com

Italy

GEZE Engineering Roma S.r.l

Via Lucrezia Romana, 91

00178 Roma

Tel. +39(0)6-72 65 311

Fax +39(0)6-72 65 3136

E-Mail: roma@geze.biz

Poland

GEZE Polska Sp.z o.o.

ul. Annopol 21

03-236 Warszawa

Tel. +48 (0)22 440 4 440

Fax +48 (0)22 440 4 400

E-Mail: geze.pl@geze.com

Romania

GEZE Romania S.R.L.

IRIDE Business Park

Str. Dimitrie Pompei nr. 9–9a

Building 10, level 2, sector 2

020335 Bucharest

Tel. +40 (0) 21 25 07 750

Fax +40 (0) 21 25 07 750

E-Mail: office-romania@geze.com

Russia

OOO GEZE RUS

Gamsonovskiy Per. 2 

115191 Moskau

Tel. +7 (0) 495 933 06 59

Fax +7 (0) 495 933 06 74
E-Mail: office-russia@geze.com

ScandinaviaX–XSweden

GEZE Scandinavia AB

Mallslingan 10

Box 7060

18711 Täby, Sweden

Tel. +46(0)8-7323-400

Fax +46(0)8-7323-499

E-Mail: sverige.se@geze.com

ScandinaviaX–XNorway

GEZE Scandinavia AB avd. Norge
Industriveien 34 B
2073 Dal
Tel. +47(0)639-57200
Fax +47(0)639-57173
E-Mail: norge.se@geze.com

ScandinaviaX–XFinland

Branch office of GEZE Scandinavia AB
Herralantie 824
Postbox 20
15871 Hollola
Tel. +358(0)10-40 05 100
Fax +358(0)10-40 05 120
E-Mail: finland.se@geze.com

ScandinaviaX–XDenmark

GEZE Denmark
Branch office of GEZE Scandinavia AB
Mårkærvej 13 J-K
2630 Taastrup
Tel. +45(0)46-32 33 24
Fax +45(0)46-32 33 26
E-Mail: danmark.se@geze.com

Singapore

GEZE (Asia Pacific) Pte, Ltd.
21 Bukit Batok Crescent
#23-75, Wcega Tower,
Singapore 658065
Tel. +65-6846 1338
Fax +65-6846 9353
E-Mail: gezesea@geze.com.sg

SouthXAfrica

GEZE Distributors (Pty) Ltd.
118 Richards Drive, Halfway House,
Ext 111, P.O. Box 7934, Midrand 1685,
South Africa
Tel. +27(0)113 158 286
Fax +27(0)113 158 261
E-Mail: info@gezesa.co.za

Switzerland

GEZE Schweiz AG
Bodenackerstrasse 79
4657 Dulliken
Tel. +41-(0)62-285 54 00
Fax +41-(0)62-285 54 01
E-Mail: schweiz.ch@geze.com

Turkey

GEZE Kapı ve Pencere Sistemleri
San. ve Tic. Ltd. Şti.
Ataşehir Bulvarı, Ata 2/3 
Plaza Kat: 9 D: 84 Ataşehir 
Ataşehir / İstanbul
Tel.  + 90  (0) 21 64 55 43 15
Fax  + 90 (0) 21 64 55 82 15
E-Mail: office-turkey@geze.com

Ukraine

GEZE Ukraine TOV
ul. Viskoznaya, 17,
Building 93-B, Office 12
02094 Kiev
Tel./Fax +38 (0) 44 501 22 25
E-Mail: office-ukraine@geze.com

UnitedXArabXEmirates/GCC

GEZE Middle East
P.O. Box 17903
Jebel Ali Free Zone 
Dubai
Tel. +971(0)4-88 33 112
Fax +971(0)4-88 33 240
E-Mail: geze@emirates.net.ae

UnitedXKingdom

GEZE UK Ltd.
Blenheim Way
Fradley Park
Lichfield
Staffordshire WS13 8SY
Tel. +44(0)1543 44 30 00
Fax +44(0)1543 44 30 01
E-Mail: info.uk@geze.com

GEZEXGmbH

P.O.Box 1363

Reinhold-Vöster-Straße 21–29

71229 Leonberg

Germany

Tel.: 0049 7152 203-0

Fax: 0049 7152 203-310

www.geze.com

132557-02

Summary of Contents for SL NT





























Reviews: