TS 5000 R-ISM BG
Mounting and securing
GB 5
Use cable protection for the 230 V cable when leading through plaster.
Insert the 230 V cable/cable for additional connections protruding from the wall through the
respective openings of the smoke detector housing!
M5x45/5x55
Fig.: 6.3.1
X
Guide 230 V power cable through smoke detector housing and shorten to approx. 80 mm (
1.
).
X
Align smoke detector housing and screw it firmly to moving-leaf guide rail and frame (
2.
).
6.4 Connecting 24 V fixed-leaf cable
Fig.: 6.4.1
X
Route 24 V fixed-leaf cable of electrical hold-open device in the upper guidance of the smoke detector hou-
sing and to the supply terminal. Secure cable with adhesive tape if necessary (
1.
).
X
Shorten excess cable to approx. 40 mm (
2.
).
X
Connect cable to terminal (
3.
).
6.5 Mains connection
Fig.: 6.5.1
X
Fuse the on-site mains connection with a B10 fuse.
X
Place (
2.
) the mains cable provided on site on the terminal and connect (
3.
).
X
Place (
4.
) the 230 V supply line of the power pack starting from the terminal and stow away extra length in the
power pack.
X
Close and screw on cover of smoke detector housing (
5.
).
Red =’+’
White = ’–’.
Summary of Contents for TS 5000 R-ISM BG
Page 35: ...Notes Notizen ...
