7
GEZE
Planungsunterlage TSA160 Datei 84338PuTSA160_GB_200999_.p65
Swing door drive for smoke and fire-proof doors
TSA 160 F
The TSA 160 F is a hold-open mechanism in accordance with the guidelines for hold-open
systems issued by DIBt *)
The drive system is used to automatically open and close fire-proof doors. The system can be
actuated via the usual pulse generators. Besides automatic opening and closing, the doors
can also be held in an open position.
In the case of fire, the automatic function or the hold-open function must be switched off by a
corresponding fire alarm system. The mains cable is interrupted by a mains PC board for
power cutoff (F-accessories) and the normal door closing function the drive is maintained.
Door closers with automatic opening function (swing door drive) in accordance with
DIN 18263 part 4 are therefore an integral part of hold-open mechanisms and require
approval by the building supervision authorities.
TSA 160 F
pushing incl. DIBt-approval for the use on
single-leaf smoke and fire-proof doors.
TSA 160 F-IS
pushing incl. integrated closer control;
incl. DIBt-approval for the use on
double-leaf doors.
TSA 160 F - IS / TS
pushing incl. integrated closer control;
incl. DIBt-approval for the use on double-leaf
doors, 2nd closing leaf incl. automatic function
1st closing leaf incl. door closer function and
permanently-open position.
*) DIBt: German Institute for Structural Engineering (Deutsches Institut für Bautechnik)
