Page 5
The enclosure should be fitted directly beside the control panel. To connect the module, the
lateral rubber plug must be carefully opened. The module cable should be guided thru the hole
into the control enclosure, and following the pre-fitted cable gland may be softly tightened by
using the enclosed nut.
The module connection plug must be fitted into the SLF socket of the TS 981 control panel. To check
the proper connection the connection cable may be pulled carefully.
Thereafter the cable could be laid into the housing and cable gland should be finally tightened.
The SLF-Module A or B must be connected to the emergency open module.
To do so, follow description above.
ENCLOSURE INSTALATION
Control panel TS 981
12
3
4
5
6
789
10
X43
8
7
6
5
4
3
2
1
SLF
Modul A or B
Emergency open module
Summary of Contents for OFF and Re-made module for airlock
Page 2: ...Page 2...
