background image

 

 

11

 

6. Cleaning and care

 

6.1 Safety advice

 

Before beginning with repair or cleaning works make sure the device has been 
disconnected from the power socket (pull the power plug!!!) and has cooled down. 

Do not use any acid agents and make sure no water ingresses the device. 

To protect yourself from electric shock, 

never 

immerse the device, its cables and 

the plug in water or other liquids. 

 

CAUTION!

 

The device is not suited for direct washing via water jets. Therefore, you must not use

 

any kind of pressure water jet for cleaning the device!

 

 

6.2 Cleaning

 

The device should be cleaned regularly. 

Put on safety gloves before cleaning in order to protect your hands from the sharp knife 
slots of the cutting discs. 

Loosen the safety catch and fold the protective cover to the side. 

Remove the cutting discs carefully, dunk them into warm water and clean them 
thoroughly with a brush. Clean the cutting discs on at a time so they cannot damage 
each other at contact. 

 

ATTENTION!

 

The cutting discs are not dishwasher proof!

 

 

Clean the cover and the tappets of the device with warm water and a mild detergent. 
Rinse with clear water. Dry the device with a soft cloth. 

Wipe off all parts with a soft sponge or cloth and a mild cleaning agent. Wipe over with a 
soft, moistened cloth, until all cleaner residues are removed. 

Only use a soft cloth and make sure you 

never 

use any kind of abrasive agents or pads 

which could scratch the surface. 

Do not use any kind of scouring-, decalcification-, solvent- or thinner agents, as their 
residues are noxious and might pollute the vegetables. 

After the cleaning procedure, you should use a soft and dry cloth to wipe dry and polish 
the surface. 

Make sure the device has been cleaned properly before storing it in a dry place. 

 

6.3 Safety instructions for maintenance

 

Check the mains lead from time to time to ensure it is not damaged in any way. Never 
use the device if the lead is damaged. If the lead is damaged, it must be replaced by a 
qualified electrician. 

In case of damage or malfunction, please contact your stockist or our customer service 
centre. 

Only  a  qualified  technician  using  original  spare  parts  and  accessories  should  carry  out 
repairs and maintenance of the device. 

Do not attempt to repair the device yourself.

 

 
 

 

Summary of Contents for GSH












Reviews: