www.ghibliwirbel.com
Professional Cleaning Machines Since 1968
ENGLISH
- 3
1.1 TECHNICAL CHARACTERISTICS
S 10
Brush motor power
W 1000
Voltage
V 220 - 240
V 110
Frequency
Hz 50
Hz 60
Hz 50
Hz 60
Oscillations per minute
n.1500
n.1800
n.1500
n.1800
Working width - ø brushes
mm 430
Brush pressure
g/cm² 25.6
Motor passage height
mm 270 WITH PAD H=25mm
Dry suction socket
YES
Noise emission
dB(A) 59.5
Drive
DIRECT
Cable length
12 m
Weight (without accessories)
Kg 43,2
Size
mm 730X450X1200
1.2 INTRODUCTION
DANGER:
Before using the appliance, read the accom-
panying
“SINGLE DISC SAFETY WARN-
INGS”
booklet carefully.
This manual forms an integral part of the
machine itself. It must therefore be kept in
a safe place where it is accessible to all us-
ers (operators and maintenance personnel)
throughout the life of the machine until it is
scrapped.
1.3 - INTENDED USE OF
THE MACHINE
WARNING:
This machine is for indoor use only.
DANGER:
Any other use releases the manufacturer
from liability for harm to persons and/or
property and invalidates any warranty
condition.
This machine is intended for commercial use,
for example in hotels, schools, hospitals, fac-
tories, shops, offices and rental businesses.
The machine has been designed and built:
for professional use, for cleaning floors and
carpets, for polishing floors, for sanding
floors (e.g. parquet and uneven surfaces).
1.4 - NON-INTENDED USE
OF THE MACHINE
WARNING:
The machine is not intended for outdoor
use.
DANGER:
- do not wash floors with water above 50 °C;
- do not use diesel/petrol or corrosive de-
tergents to wash floors;
- do not wash and suck up corrosive, flam-
mable or explosive liquids, even if diluted.
Manuale O143 S10_GH30-933_2ed_09-2019_11lingue.indd 3
20/09/2019 14:01:48
