ENGLISH - 11 -
The machine case containing mobile parts must not be removed by the operator.
Mind other people, especially children, when operating the vacuum.
Handle the machine carefully, especially on slopes or ramps.
Do not turnaround the machine on slopes.
Set on the wheel brake to ensure that the machine position is stable.
Cleaning, maintenance and part replacement operations must always be executed after having switched off
and unplugged the machine.
Repair operations must be executed by qualified personnel only.
Be careful not to damage or squash the supply cable (cord) when operating the machine.
Check the supply cable on regular basis. Do not use the machine If the cable is damaged.
In case of cable, tap or connector replacement, ensure protection against water and check mechanical
strength.
Do not drag the machine pulling the supply cable and the suction hose.
The final user must provide for the collected substances waste disposal in compliance with the applicable
laws and regulations in force.
Machine overhaul is recommended after 10 years of life. The overhaul should be performed by
GHIBLI&WIRBEL Srl, the manufacturer.
The machine is delivered to the final user with the following documentation: instructions manual spare part
list, declaration of conformity, warranty certificate, homologation certificate, electrical and pneumatic
technical files.
The manufacturer will not be liable for any damage which may occur in connection with the use or service
of vacuum supplied in case it is utilized with tools or accessories that have not been provided by
GHIBLI&WIRBEL Srl. Without prejudice for the above, it is recommended to keep the machine construction
complying with the safety standards prescribed by the 2006/42/CE Machine Directive and Atex
2014/34/EU Directive.
Keep the vacuum clean and free of any contamination material such as dust, debris or oil. Moreover, keep it
away from tools or other objects which may affect the machine efficiency and cause damage and/or injury.
Do not use flammable or toxic solvents, such as gasoline, benzene, ether and alcohol for cleaning.
Avoid long-time exposure to solvents and inhalation of solvent vapours. Do not use solvents in presence of
heat or fire sources.
