Ghibli & Wirbel FR 15 E 38, Use And Maintenance

www.ghibliwirbel.com 

Professional Cleaning Machines Since 1968

ENGLISH 

- 5

4.1.c -  Electrical connection  (for E 

version only) (Fig. 6)

-  Mount the snap hook with cable (37) on 

the handle (1).

-  Insert the extension cable (42) (if pre-

sent) in the anti-tear hook (38), blocking it 

as shown in the figure.

-  Secure the hook (38) to the snap hook 

(37) and connect the socket (43) of the 

extension (42) to the plug (44) of the ma-

chine.

-  Connect the power cord to an outlet hav-

ing minimum capacity of 10A.

 WARNING:

-  Make sure that the mains system is 

equipped with an RCD (circuit breaker).

-  Unwind the electric power cable com-

pletely before operating the appliance.

-  Use an electrical extension lead only 

if in perfect condition; ensure that the 

section is appropriate for the appliance 

power rating.

-  Never let the power cable run over 

sharp edges and do not tread on it.

4.1.d -  Assembling the brush (Fig. 7)

-  Position the brush (35) on the ground.

-  Lift the front of the machine up by lever-

ing the handle (1 Fig. 1) and remove the 

polystyrene support (45).

-  Position the flange (12) above the brush 

(35).

-  Press the button (26 Fig. 1) that illumi-

nates, then, for starting the rotation of 

the brush, press the levers (4 Fig. 1) until 

hearing the coupling “Click” of the attach-

ment of the brush, then release levers (4 

Fig. 1) and press the button (26 Fig. 1) 

and the light turns off.

 WARNING:

Use only brushes provided by the manu-

facturer according to the model of the ma-

chine.

Using other types of brushes may com-

promise the safety of the machine.

5.1 CHARGING THE 

BATTERY (Fig. 8) 

(for BC version only) 

 DANGER:

Charge the batteries in well-ventilated ar-

eas which comply with standards in force 

in the country of use.
For safety-related information, follow 

what is described in chapter 1 of this 

manual.

 WARNING:

For information and warnings about the 

battery and the battery charger, follow 

what is described in the battery and bat-

tery charger manual enclosed with this 

document.

-  Move the machine to the vicinity of a 

main electrical socket.

-   Unwind the cable (46) and connect it to 

the outlet.

 WARNING:

Check that the mains voltage is compat-

ible with the operating voltage of the bat-

tery charger.

-  Leave the batteries to charge until the 

“Green” LED (47) comes on, then remove 

the power cable (46) and wind it up in the 

specific support.

N.B.: 

10 hours are needed for complete battery 

charging. 

Avoid partial recharges.

 WARNING:

-  Make sure that the mains system is 

equipped with an RCD (circuit breaker).

-  Unwind the electric power cable com-

pletely before connecting it to the 

mains socket.

-  Use an electrical extension lead only 

if in perfect condition; ensure that the 

Manuale FRECCIA 15_49021800_1ed_06-2017_a.indd   5

15/06/17   11:43