background image

www.ghibliwirbel.com 

Professional Cleaning Machines Since 1968

ENGLISH 

- 13

TROUBLESHOOTING

PROBLEM

CAUSE

SOLUTION

The machine does not start 

when pressing the central 

button. 

Low battery (for BC version 

only).

Plug disconnected (for E ver-

sion only).

Main fuse blown (for BC ver-

sion only).

Check that the battery is 

charged.

Connect the plug.

Replace the GREEN 30A 

main fuse.

The brush does not rotate.

Brush unit outlet overcurrent 

error or brush unit open cir-

cuit error.

Brush motor damaged.

Brush rotation enabling but-

ton not pressed.

See paragraph “Warning 

signals while using the ma-

chine”.

Replace the ratiomotor.

Press the button.

Aspirator does not work.

Suction unit outlet overcur-

rent error or suction unit 

open circuit error

.

Intake motor damaged.

Aspirator enabling button not 

pressed.

See paragraph “Warning 

signals while using the ma-

chine”.

Replace the turbine.

Press the button.

The machine does not dry 

well, leaving traces of water 

on the floor. 

Aspirator off.

Aspiration tube blocked.

Squeegee rubbers not cor-

rectly set up.

Recovery tank full.

Squeegee rubber blades 

worn.

Start up the aspirator.

Check and if necessary 

clean the aspiration tube that 

connects the squeegee to 

the recovery tank.

 

Set up the squeegee rubbers 

as indicated in paragraph 

“Squeegee setting”

.

Empty the recovery tank.

Replace or turn over the 

squeegee rubber blades.

Manuale FRECCIA 15_49021800_1ed_06-2017_a.indd   13

15/06/17   11:43

Summary of Contents for FR 15 E 38





























Reviews: