ENGLISH - 9 -
2.1
Safety details
The person in charge of safety shall be responsible for informing workers about the risks associated with
vacuum cleaner operation.
The obligation also exists of training workers so they are able to protect themselves and others.
Failure to observe basic safety regulations and Warnings could cause accidents during vacuum cleaner
operation, maintenance and repair. Accidents can often be avoided by recognising potentially dangerous
situations before these occur. Operators should be aware of potential hazards and be trained and skilled
enough. They should also have the tools necessary to perform these duties properly.
GHIBLI&WIRBEL
shall under no circumstances be deemed liable for accidents or damage caused by use of
the vacuum cleaner by personnel not properly trained or who use it in an improper manner, as well as by
even partial failure to comply with the safety regulations and intervention procedures indicated in this
manual.
The safety Warnings and warning notices are indicated in this manual and on the product.
Unless these hazard messages are heeded, the operator could become involved in accidents with serious
consequences for him/herself and for other people.
The safety messages are highlighted by the following symbols:
Attention!
Unless these messages are heeded, operator injuries could occur.
Warning!
Unless these messages are heeded, vacuum cleaner damage could occur.
GHIBLI&WIRBEL
cannot foresee all possible circumstances capable of representing a potential hazard. The
warnings in this manual and on the products should not therefore be deemed exhaustive. In the event of
tools, procedures, work or machining methods being used that are not explicitly recommended by
GHIBLI&WIRBEL
, make sure no hazards exist for operators and others.
Only ever use original GHIBLI&WIRBEL spare parts.
GHIBLI&WIRBEL declines all liability in the event of non-original spare parts being used.
Summary of Contents for Power Indust AX20 Z22
Page 153: ......
