ENGLISH - 10 -
2.2
Safety precautions
Warning!
The instructions prescribed herein cannot preserve you from any danger in connection with the vacuum
use and service. To prevent injury, it is necessary to operate with care and competence, relying on
experience.
In addition to the following instructions, specific safety warnings for the different operations are reported
in each section.
Maintenance operations must always be executed after unplugging the machine.
In compliance with the applicable laws and regulations in force, the employer must ensure that the workers
and staff using the equipment are properly trained and informed.
Before operating this equipment, carefully read the herein manual as a preliminary personal training step.
Untrained or unauthorized people must be forbidden to operate this machine.
Connect the grounding clamp with a conductive surface connected with the earth.
Do not manumit the vacuum/pressure relief valve.
All maintenance operations must be executed in non-classified atmosphere.
Do not vacuum incandescent or burning material.
The operator must always wear antistatic cloths and shoes. The floor of the area to be vacuumed must be
antistatic.
The opening of the dust collection container must be executed in non-classified atmosphere area, after
having disconnected and unplugged the machine and only after 10 minutes from unplugging.
It is prohibited to vacuum toxic substances unless the machine is provided with the necessary specific filters
for the type of dust to be vacuumed. Such specific filters must be expressly required by the Customer for
supply.
Do not vacuum flammable or explosive substances gases or liquids (fuels, solvents etc.).
Do not vacuum corrosive substances unless the machine is equipped with suitable containers (
Stainless-
steel AISI 304
).
If the filters are correctly fitted, the machine will not release any collected substance into the environment.
In case the machine is used to vacuum toxic-harmful substances, the emptying of the collection container
as well as the filter cleaning operations must be execute using the appropriate safety devices required to
protect the operator from the collected substances.
Do not lay any object or material on the horizontal guards.
Summary of Contents for Power Indust AX20 Z22
Page 153: ......
