www.ghibliwirbel.com
Professional Cleaning Machines Since 1968
ENGLISH
- 8
7.1.d - Using the machine (Fig. 1)
- After turning the machine on and se-
lecting the cycle, the cleaning operation
starts, pushing the machine with the help
of the handle (1).
N.B.:
Pay attention to particularly delicate floors;
do not use the machine while it’s stopped
and the brush rotation on.
N.B.:
The proper cleaning and drying of the floor
is done by pushing the machine forwards;
if you go backwards the machine will not
perform drying; in this phase, always lift the
wiper to avoid damaging the blades.
- If necessary, adjust the quantity of wash-
ing water using the tap (4 Fig. 1).
7.1.e - Adjusting the movement direc-
tion (Fig. 10)
If during the cleaning operation (rotating
brushes) we notice that the machine is not
moving in a straight line, but tends to go left
or right, you can adjust the direction of the
wheels (44).
- Start the machine and begin the rotation
of the brushes.
If the car tends to go to the right, gently
turn the wheel button (44) to “S” until the
direction is right;
If the car tends to go to the left, gently
rotate the wheel button (44) to “D” until
the direction is right.
7.1.f - Adjusting traction help
(Fig. 10)
The function of the hand wheel (45) is to in-
crease / decrease the ground pressure of the
brush in order to facilitate thrusting forward
the machine.
- Turning the hand wheel (45) clockwise
will decrease traction adjustment and
conversely it will increase it.
7.1.g - End of use and switching off
(Figg. 6-11)
- Once the cleaning operations have been
completed, do not shut off the machine
immediately: use switches (39) and (38)
to deactivate water dispensing and brush
rotation.
- Lift up the brush by pressing the pedal
(19 Fig. 11) as far as it will go, fitting it in
the designated slot.
- Continue with the aspirator inserted to
aspirate all the liquid on the floor, then
turn off the aspirator by pressing the
switch (35 Fig. 6).
- Lift the squeegee (11 Fig. 11) by lifting
the lever (3 Fig. 11).
WARNING:
Always lift the wiper and the end piece
after finishing the cleaning operations be-
cause this avoids the deformation of the
rubber blades and of the brush hairs.
- Press the switch (34 Fig. 6) on “0” to turn
off the machine.
- Disconnect the plug from the socket.
Man_ROUND45e55TOUCH-RAPID40E55Touch_1ed_10-2017_49025600.indd 8
24/10/17 10:20
