www.ghibliwirbel.com
Professional Cleaning Machines Since 1968
ENGLISH
- 11
Disable to disable it or “Enabled” to en-
able it and then press the button (51) “
” to confirm your choice.
8.1 DISPLAY (Fig. 9-10)
The following pictograms appear on the dis-
play:
“A”
= Battery
Indicates the battery charge status;
“A1”
= battery charged;
“
A2
”
= battery discharged.
0
MAX
= traction speed (if present)
The movement speed can be changed from
“0“ to the maximum speed in 5 steps, using
buttons “
” and “
” to increase or de-
crease the speed.
“
”= reverse (if present)
This appears on the display when selecting
the button
“
”
and a reverse operation is
performed; when the button is released the
pictogram disappears.
“
” = Aspirator operating
This appears on the display when selecting
the button “
” indicating that the aspirator
is operating; when repressing the button “
” to stop operation, the pictogram will
flash for a few seconds and disappears when
the aspirator stops.
“
”= Silent operation
Vacuum in operation.
This appears on the display when selecting
the button “
” indicating that the aspirator
is operating at a reduced speed; by press-
ing again the button “
” and holding it for
a few seconds, the symbol “
” will disap-
pear and then you will see the symbol “
”
activating the normal operation.
“
” = Water dispensing presetting
This appears on the display when select-
ing the button “
” indicating that the wa-
ter dispensing solenoid valve is enabled; by
repeatedly pressing the button (51) “
”
the amount of water is increased; once the
maximum amount is reached, the display will
show the symbol ” ”; repressing the button
(51) will disable the function.
“
”= Brush rotation presetting
This appears on the display when selecting
the button “
” indicating that brush rotation
is enabled; when repressing the button “
” brush rotation motor operation is disabled
and the pictogram disappears.
“
” = Maximum fluid level in the tank
This displays when the fluid in the recovery
tank has reached hte maximum level.
“
” = Chemical agent dispenser
(optional)
This appears on the screen when you press
the button (49) “
” indicating the dispensed
amount of chemical agent.
“
ECO
” = ECO mode
It displays, when the ECO function is active,
with the button (88) (88) “
ECO
” .
9.1 FILLING THE TANK
(Fig. 11
)
WARNING:
Only add clean mains water to the tank at
a temperature no greater than 50°C.
- Before filling the tank, check the level of
the chemical agent (if any), as indicated
in the relevant section.
- Remove the hose (26) supplied, connect
one end (26a) to a tap and insert the oth-
er end (26b) in the tank (5).
- Check that the tap (53) is open.
MAN_ROUND45TOUCHECO_ed_02-2018_49026000.indd 11
28/02/18 11:38
Summary of Contents for Round 45 Touch 45D55
Page 4: ......
Page 6: ......
Page 30: ...www ghibliwirbel com Professional Cleaning Machines Since 1968 ENGLISH 24...
Page 31: ......
