GHL Doser Resource Guide
Release 07/2018
15
●
Use the Doser’s Wi-Fi to add it to your existing Wi-Fi network:
Standard Wi-Fi
Connection
Direct Wi-Fi Connection
These steps will ONLY work with default doser Wi-Fi settings or when set to Access
point mode.
1.
Using your smartphone or tablet, go to the Google PlayStore or App Store and download
“GHL Connect”.
2.
With GHL Control downloaded, go to your device’s Wi-Fi settings and search for
available Wi-Fi networks. You should see “GHL Doser 2.1” or “GHL Doser Maxi” listed.
3.
Select your doser and wait for your device to successfully connect to the GHL Doser’s
Wi-Fi hotspot.
4.
Once your device is connected to the doser’s hotspot, open the “GHL Connect” app.
5.
Select “Add Device” and select the device you wish to add.
6.
You will then see two fill-in blanks, “Display name” and “Host/IP”. Give this connection
any name you wish. Enter
10.10.100.254
into the “Host” section and tap “ADD”.
7.
Select the connection you just made and the device will connect to the doser.
If you wish to have more flexible connectivity options to your doser, we recommend having
your doser join an existing Wi-Fi network. Doing this will allow you to use myGHL cloud and still
have access through our smartphone app.
Standard Wi-Fi Connection
To configure your Doser SA to join an existing Wi-Fi network, please follow these
steps.
1.
Using the USB cable included in the box, connect it to the Standalone Doser and PC.
2.
Open “GHL Control Center” and connect to the GHL Doser via USB.
3.
Click on “System”.
4.
Under
WiFi/LAN
, click on “Settings”. A new window will pop up.
