Instruction Manual
KH Director®
EN
2018-02-19
33
5.3.3
Daily automated measurement
If you want to carry out automatic KH measurements daily, you can define a
Time schedule
.
Measurements/day
As often (1 to 24) is measured daily at equal intervals
Always measure at this time
This allows you to select a time to always be measured
➢
You want to measure twice a day at 07:00 and 19:00.
1.
Set for
Measurements per day
= 2
2.
for
Always measure at this time
, set 07:00 (the second time is automatically: 07:00 +
24h / 2 = 19:00)
•
In most cases, it will not be necessary to measure more than once or twice a
day. If the dosing pumps regulating the KH value are used correctly and the
control procedure explained below is followed, a sufficiently stable KH value will
be reached.
•
The more often you measure, the more reagent fluid will be consumed.
5.4
Alarm
The
KH Director
can monitor the measured KH value and, if necessary, display an alarm. To
do this, activate the alarm monitoring and specify the
Lower
and the
Upper limit
for the
The KH measurement is only started if at least 50 ml of reagent fluid is
available!
Example
Note
