GHM Messtechnik GmbH – Location Martens
Kiebitzhörn 18 ● 22885 Barsbüttel ● Germany
Phone +49-40-670 73-0 ● Fax -288
www.ghm-messtechnik.de ● info@martens-elektronik.de
19
9.
Return to manufacturer
The legal regulations for environmental protection and our personnel re-
quire that devices which are sent back which have come into contact with
liquid are handled without risk to people or the environment.
If you send a device back to us for inspection or repair, we must request that you
strictly observe the following requirements:
On the GHM homepage under 'Downloads/forms' a return shipment form can be
downloaded.
The repair can be performed quickly and without call-back questions if:
1. a filled-in form is provided for each device,
2. the device has been cleaned and packaging which prevents damage to the de-
vice is used, and
3. a safety data sheet for the measuring medium is affixed to the outside of the
package, if the device has come into contact with a critical substance.
10.
Disposal
Separation by material and recycling of device components and packaging
must take place when the device is disposed of. The valid legal regulations
and directives applicable at the time must be observed.
The device may not be disposed of with household waste. If the device should be
disposed of, return it to us with the return shipment form described in the chapter
'Returns' filled in. We will then arrange for the proper disposal.
11
Imprint
GHM Messtechnik GmbH
Standort Martens, Kiebitzhörn 18, 22885 Barsbüttel, Germany
Managing Director: Günther Oehler
Registered office:
Schloßstr. 6
,
88453 Erolzheim / Germany
Amtsgericht Ulm, Commercial Register Section B
730462
Copyright: GHM Messtechnik GmbH. All rights reserved. Reprints, digital use of any
type, and duplication may only take place with the written authorisation of GHM
Messtechnik GmbH.
DANGER
