25
5 Device transport and storage
Gentle and tension-free packaging of the housing must be ensured for transport (no
machine wrapping of the package).
The device must be stored in the environmental conditions specified in the
technical data.
6 Return to manufacturer
The legal regulations for environmental protection and our personnel
require that devices which are sent back which have come into contact
with liquid are handled without risk to people or the environment.
If you send a device back to us for inspection or repair, we must request
that you strictly observe the following requirements:
On the GHM homepage under: 'Downloads/forms' a return shipment form can be
downloaded.
The repair can be performed quickly and without call-back questions if:
1.
a filled-in form is provided for each device,
2.
the device has been cleaned and packaging which prevents damage to the
device is used, and
3.
a safety data sheet for the measuring medium is affixed to the outside of the
package, if the device has come into contact with a critical substance.
7 Disposal
Separation by material and recycling of device components and
packaging must take place when the device is disposed of. The valid
legal regulations and directives applicable at the time must be observed.
The device may not be disposed of with household waste. If the device
should be disposed of, return it to us with the return shipment form filled in under
section 6 Return to manufacturer. We will then arrange for the proper disposal.
8 Imprint
GHM GROUP - Martens
GHM Messtechnik GmbH | Kiebitzhörn 18 | 22885 Barsbüttel
Managing Director
Dipl.-Ing. (FH) of Process and Environmental Technology Johannes Overhues
Registered office: Schloßstr. 6,
88453 Erolzheim / Germany
Ulm District Court, Commercial Register Section B 730462 Copyright: GHM
Messtechnik GmbH. All rights reserved. Reprints, digital use of any type, and
duplication may only take place with the written authorisation of GHM Messtechnik
GmbH.
DANGER
