H56.0.02.6C-01
Operating Manual GTH 1150
Page 10 von 10
_____________________________________________________
_____________________________________________________________________________
9 Specification
Resolution
1 °C
Measuring range
-
50 … 1150 °C
Accuracy
(
at nominal temperature
)
±0.2 % v.MW. ±0.2 % FS.
For more detailed values please refer to chapter 5 Basics of
the measurement
Sensor
Type K (NiCr-Ni), acc. to ½ DIN 43710, for plug-in operation.
(Not included in scope off supply). Special design sensors
incl. one of the following probes see chapter 6 Type K-sensor
Nominal temperature
25 °C
Working temperature
0 to +45 °C, please avoid quick temperature changes, if
possible, otherwise a temperature adjustment time of approx.
15 minutes has to be taken into account
Atmospheric humidity
0 … 80 % RH (not-condensing)
Storage temperature
-
25 … +70 °C (Over 50 °C please remove battery)
Display
approx. 13 mm high, 3½-digit LCD
Power supply
9V-Battery, type IEC 6F22
Battery service life
> 1000 hours
Low battery warning
„
BAT
“displayed automatically in case of low battery.
Dimensions of case
106 x 67 x 30 mm (L x B x D)
Weight
approx. 130 g (including battery)
Directives and standards
The instruments confirm to following European directives:
2014/30/EU
EMV directives
2011/65/EU
RoHS
2012/19/EU
WEEE
Applied harmonized standards:
EN 61326-1:2013
emissions level: class B
emi immunity according to table
1 /A.1
additional error: < 0.5 % FS
EN 50581:2012
The device is for the mobile application or for the stationary
operation in the course of specified working conditions
without further restrictions construed.
