29
E-HYBRIDE TRAIL 9000 LADY / MAN
E-HYBRIDE TRAIL 4000 LADY / MAN
E-HYBRIDE STREET LADY / MAN
1.
Unscrew the dust cap from the valve.
NOTE:
Your EPAC is equipped with an automatic valve.
2.
Check the air pressure with a tyre pressure gauge at a petrol station or with an air pump
with a manometer.
NOTE:
if necessary, ask the petrol pump attendant or your specialist bicycle dealer to show you
how to use the pressure test equipment.
·
If the air pressure is too low:
Increase the air pressure.
·
If the air pressure is too high:
Reduce the air pressure by allowing air to escape through the valve.
Check the air pressure again.
3.
Screw the dust cap back on to the valve.
NOTE:
with a bicycle pump with manometer you can check the air pressure while you are pumping up the tyre. You
should first of all let a small amount of air escape from the tyre and then increase the air pressure up to the
desired value.
6.1.2.4 Checking that the tyre is correctly fitted
1.
Lift the front wheel.
2.
Turn the front wheel by hand.
The tyre must run smoothly.
There must be no wobble or eccentricity.
3.
Check the back wheel in the same way as the front wheel.
6.1.3
Checking other points
1.
Check whether there are any other loose items such as twigs, substance residues or
similar items in your wheels.
2.
Remove such items carefully.
3.
If you have had spoke reflectors fitted, check that these are firmly fitted in place.
4.
If they are loose, please remove them completely.
5.
Check whether your wheels have been damaged by these loose parts.