42
For every alarms well be reported the alarm name (modifiable), the bit configuration for the
alarm identification (not modifiable). In the lower part, you can choose whether to enable the
digital outputs or not when an event occurs (Ref. 5.1.9)
o
Output 1
: when an alarm occurs, you can enable an operation according to the
device connected to Output 1, such as:
o
Open
: commands to open
o
Close
: commands to close
o
Pulse
: generates a pulse
o
Output 2
: when an event occurs, you can enable an operation according to the
device connected to Output 2, such as:
o
Open
: commands to open
o
Close
: commands to close