76
19.
APPENDIX
19.1.1
ROUTER Configuration
The router is provided with an operating configuration. Should you need to change the parameters,
proceed as follows:
•
activation of a flat contract with a traffic threshold greater or equal to 500Mb monthly and
suppression / bandwidth limitation if the threshold upper limit is exceeded
•
insert the SIM ensuring that it is PIN free
•
connect the router to the power supply
•
user a crossover cable to connect the router to the LAN port of a PC
•
connect the antenna to the “GSM MAIN” output
•
type in the following address in your browser:
http://192.168.1.1
•
You will be prompted to enter your access data:
o
Username:
admin
o
Password:
admin01
Upon accessing for the first time, a configuration wizard will help you to quickly set the basic information to
ensure router operation. Check the connection status to ensure the presence of a signal. From the menu at
the top, press
Status
followed by
Network
Information
. A window will appear, as shown in Figure .
Figure 1. - Network Information
For an acceptable Internet connection which allows internet browsing, you need to have at least two green
bars on the
Signal
Strength
line. If not, connect the second antenna provided with the router to the
GSM
AUX
output. A strong enough signal allows for Internet connection. Having a signal with the above
requirements provides an internet connection suitable to the service to provide, the absence of an IP
address in the
IP
Address
line involves failure to network connection.
The
Network
section includes the sections in the initial wizard together with other functions. The following
screen refers solely to the
3G
area. Figure shows the
3G
CONFIGURATION
submenu to enter the APN. For
each service provider is associated an APN.
