7
Giacomini S.p.A.
Via per Alzo 39, 28017 San Maurizio d’Opaglio (NO) Italia
consulenza.prodotti@giacomini.com
+39 0322 923372 - giacomini.com
Settings of the remote control/chronothermostat
Impostazione orologio e temperature
Depending on the operating mode selected (OFF / SUMMER / WINTER / HEATING ONLY) by pressing the button
,
the clock and the temperature of the boiler can be set.
The value is displayed for a time equal to the display settings time delay and is identified by its flashing icon. Press key
to pass to the next value and turn the knob
to modify the value.
• Clock:
press key
until the icon
and the time value start to flash.
Turn the knob
to select the desired time.
Press the knob
to pass to the minutes.
The minutes start flashing: turn the knob
to select the desired minutes. Press the knob
to pass to the day of
the week. The days of the week start flashing: turn the knob
to select the desired day.
Press the knob
to confirm the value entered.
• Day Set point:
press key
until the icon
and the day set point value start to flash.
Turn the knob
to select the desired value.
• Night Set point:
press key
until the icon
and the night set point value start to flash.
Turn the knob
to select the desired value.
• Heating Set point:
press key
until the icon
and the heating set point value start to flash.
Turn the knob
to select the desired value.
• DHW Set point:
press key
until the icon
and the DHW set point value start to flash.
Turn the knob
to select the desired value.
• Kd:
this setting is only available if the remote control is configured as the modulator with the use of the external probe (P04
= 2 or 3). Press key
until the icon
and the relative value start to flash.
Turn the knob
to select the desired value.
NOTE.
For the other operating modes of the remote control, refer to the corresponding instruction sheet.
Operation in mode: OFF, SUMMER, WINTER, HEATING ONLY
The selection of the operating mode is done by repeatedly pressing the button
.
• Off:
“OFF” and the current time are shown on the display. Only the antifreeze function (if set) is enabled in this mode.
Any request for the DHW or heating mode operation is ignored.
• Summer:
the measured room temperature, the current time and the icon are displayed
. The DHW, if set, and the antifreeze
function are enabled in this mode. Any request for the heating mode operation is ignored.
• Winter:
the display shows the measured room temperature, the time and the current day, the icons
and the program
set for the current day. All DHW, heating and, if set, antifreeze functions are enabled in this mode.
• Heating only:
the display shows the measured room temperature, the time and the current day, the icon and the program
set for the current day. All heating and, if set, antifreeze functions are enabled in this mode.
Any request for the DHW mode operation is ignored.
