Gianneschi
Pumps and Blowers
s.r.l. - Via G. Pastore, n°19/21
– 55040 Capezzano Pianore (LU) - ITALIA
Tel: +39 0584 969391
Fax: +39 0584 969411
Cod. Fisc. e P.Iva IT: 01619620469
– (REA 154940 Lucca) – Cap. Soc. 54.000 €
web site: www.gianneschi.net; e-mail: info@gianneschi.net
12
7. Remove the Seeger (Part. 7), the
spacer and the mechanical seal (Part.
9) with its graphite ring (Part.10)
8. Unscrew the 4 body pump screw
(Part. 23)
9. Remove the body pump (Part. 11)
if it’s
necessary using the rubber hammer
10. Unscrew the 4 screw for fixing the
flange to the motor (Part. 22)
11. Extract the flange (Part. 21) with the
shaft (Part. 18) and the bearing (Part.
16 and 19), if it’s necessary using the
rubber hammer
12. Remove the Oil-Seal (Part. 14)