6
TURNING ON THE FREEZER
• After switching the power on, the power indicator icon
will light up on the LCD display. The fridge/freezer is now in
standby.
• Press the button three seconds continually, the LCD
display will light up, the power indicator icon will
extinguish. The digital display shows the current interior
temperature, supply voltage and other setting parameters,
the icon indicates the fridge/freezer has start working.
• The shows the working status of the compressor, light
up shows the compressor is working, extinguish shows
the compressor has stopped working.
CAUTION: Place the freezer in a well ventilated dry location,
and check that the heat dissipation outlet is not blocked.
SETTING THE TEMPERATURE
For models with the Dual Zone feature the LCD display has
2 temperature read-outs, one for each bin compartment.
• To set the temperature of each individual bin compartment
press the button once to set left bin temperature and
twice to set right bin.
• Press both the buttons to set the temperature from
-18°C to 10°C, or 0°F to 50°F. The setting temperature
appears on the display for a few seconds. The display
flashes several times and then the interior temperature is
displayed again.
• Press the button to confirm the setting temperature.
To change between centigrade (°C) degree and Fahrenheit
degree (°F) display modes press the button three times.
NOTE: If the ambient temperature is above +32°C (+90° F),
the minimum temperature cannot be attained.
Temperature / Error code
Storage symbol
°C/°F
Temperature / Error code
Battery protector
level
Power
indicator
Compressor
working status
Supply voltage
V
L
V
M
V
H
V
888
888 888