4
unit operation (cont.)
BLOWER OPERATION (cont.)
TO BLOW DEBRIS OUT TOWARD FRONT OF UNIT:
(all models except 13KH)
•
Open the forward air deflector door, mounted
on the front of the discharge end of the blower,
by pushing the control lever to the front of the
machine. This feature is ideal for such things
as blowing debris from a wall or fence. Adjust
engine speed to increase or decrease air
discharge rate.
TO BLOW DEBRIS OUT TOWARD SIDE OF UNIT:
•
Close the forward air deflector door (all models
except 13KH). Adjust the side air deflector,
mounted on the discharge end of the blower.
NOTE: SHUT UNIT DOWN BEFORE
ADJUSTING SIDE DEFLECTOR.
This will
permit you to direct the air at the angle you
desire for a specific application. Adjust engine
speed to increase or decrease air discharge
rate. By changing the deflector angle and the
engine speed, you can move debris into a neat
row easily and rapidly.
HINTS FOR EFFECTIVE OPERATION:
•
For operator ease and maneuverability, push down on the upper handle while walking so that the machine
balances on the rear wheels.
•
When blowing dry debris, set blower discharge to lower rate; when blowing wet or frozen debris, increase
discharge rate.
ADJUST
OPEN
CLOSE
