Giant E-bike 2016, User Manual

10

Power assist:

Press the Assistance level button (Q) up or down to 
choose the correct Power assist level (E).
•  OFF: For riding without power assist but with 

bicycle computer and light functions. 

•  Assistance: Some E-bikes use  ‘ECO/NORMAL/

POWER’, others use ‘ECO/TOUR/ACTIVE/
SPORT/POWER’ for assistance. 

•  The lower the assistance, the higher the range. 
•  The higher the assistance, the lower the range.

Walk assist:

Walk assist is used to help you while walking with the 
bike. It works up to a speed of 6km/h / 4mph. Walk 
assist is at its most powerful in the lowest gear, which 
means the smallest chain wheel up front and the 
biggest sprocket on the rear. 

Lighting

Press the Light button (R) to switch the lights on/off. 
The EnergyPak supplies power to the lights. 
The lights will stay on when the bicycle is standing 
still. 

- For 

EVO 

display:

•  When the bike is switched on, lights will be 

switched on. Backlight is on as well.

•  Press light button to dim backlight. Lights are still 

on.

•  Press light button again to switch off light and dim 

backlight.

•  For S-pedalecs (high speed E-bikes) this button 

switches between low beam and high beam.

- For 

CHARGE 

display:

•  When the bike is switched on, the display shows its initial settings without backlight. 
•  When lights are switched on on a bike with 

CHARGE

 display, the intensity of the LEDS will be 

dimmed for better visibility in darkness. 

- - -