background image

GIANT INDUSTRIES, INC.

 900 N. Westwood Ave., Toledo, Ohio  43607              

Phone: (419)-531-4600  FAX (419)-531-6836, www.giantpumps.com

 

Copyright 2022 Giant Industries, Inc.

08/22   GP7622.indd

GIANT INDUSTRIES LIMITED WARRANTY

Giant Industries, Inc. pumps and accessories are warranted by the manufacturer to be free from defects in 

workmanship and material as follows:

 

1.    Five (5) years from the date of shipment for all pumps used in portable pressure  

 

 

washers with NON-SALINE, clean water applications.

 

2.    Two (2) years from the date of shipment for Giant pumps used in car wash    

 

 applications.

 

3.    One (1) year from the date of shipment for all other Giant industrial and  

 

 

 

consumer pumps.

 

4.    Six (6) months from the date of shipment for all rebuilt pumps

 

5.    Ninety (90) days from the date of shipment for all Giant accessories.

                   

This warranty is limited to repair or replacement of pumps and accessories of which the  manufacturer’s 

evaluation shows were defective at the time of shipment by the manufacturer.  The following items are NOT 

covered or will void the warranty:

 

1.   Defects caused by negligence or fault of the buyer or third party.

 

2.    Normal wear and tear to standard wear parts.

 

3.   Use of repair parts other than those manufactured or authorized by Giant.

 

4.   Improper use of the product as a component part.

 

5.   Changes or modifications made by the customer or third party.

 

6.   The operation of pumps and or accessories exceeding the specifications set forth  

 

 

in the Operations Manuals provided by Giant Industries, Inc.

Liability under this warranty is on all non-wear parts and limited to the replacement or repair of those products 

returned freight prepaid to Giant Industries which are deemed to be defective due to workmanship or failure of 

material.  A Returned Goods Authorization (R.G.A.) number and completed warranty evaluation form is required 

prior

 to the return to Giant Industries of all products under warranty consideration.  Call (419)-531-4600 or fax 

(419)-531-6836 to obtain an R.G.A. number.

Repair or replacement of defective products as provided is the sole and exclusive remedy provided hereunder 

and the MANUFACTURER SHALL NOT BE LIABLE FOR FURTHER LOSS, DAMAGES, OR EXPENSES, 

INCLUDING INCIDENTAL AND CONSEQUENTIAL DAMAGES DIRECTLY OR INDIRECTLY ARISING FROM 

THE SALE OR USE OF THIS PRODUCT.
THE LIMITED WARRANTY SET FORTH HEREIN IS IN LIEU OF ALL OTHER WARRANTIES OR 

REPRESENTATION, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTIES 

OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AND ALL SUCH WARRANTIES 

ARE HEREBY DISCLAIMED AND EXCLUDED BY THE MANUFACTURER.

  

 

WARNING:

 This product might contain a chemical known to the State of California to cause  

             

 

cancer, and birth defects or other reproductive harm. 

             

For more information go to www.P65Warnings.ca.gov

  

  

GP7622 Dimensions - Inches (mm)

Summary of Contents for GP7622









Reviews: