- Pag. 2. -
1. Introduction.
PROFESSIONAL CROSS COUNTRY BIKE:
•
Unique 4 bar linkage design
•
NRS
™
(No Resonance System) suspension with “zero-SAG” set-up
•
Also possible to set up with “SAG”
•
Sealed bearings on all pivots
•
Rising rate susp “zero-SAG” result in “no bobbing” and “no power loss”
•
Air shock with adjustable rebound damping
•
Sensitive rear shock works even on the smallest bumps
•
Rear wheel travel: approx. 75~95mm. (3~3¾ inches)
•
Front wheel travel: 80 mm. (more than 3 inches).
Giant’s products are designed to provide years of recreation and enjoyment.
The GIANT NRS™ bikes have been designed as Cross Country racing bikes, but are suitable for
allround use as well.
However, in order to fully understand all the bicycle features, you must read this bicycle manual,
instructions for the suspension fork and other components, provided by Giant and parts suppliers.
If you do not understand any information in the manuals or if you misplace any of them, please contact
your authorised Giant dealer immediately.
Please take the time to read and understand this material to help limit the possibility of serious injury.
ALWAYS read and follow all instructions in this manual.
It is very important that your dealer carries out any repair or maintenance, which is not described in this
manual.
