background image

GIANT INDUSTRIES LIMITED WARRANTY

Giant Industries, Inc. pumps and accessories are warranted by the manufacturer to be free from defects in 

workmanship and material as follows:

 

1.  For portable pressure washers and self-service car wash applications, the discharge manifolds 

will never fail, period. If they ever fail, we will replace them free of charge. Our other pump parts, 

used in portable pressure washers and in car wash applications, are warranted for five years 

from the date of shipment for all pumps used in NON-SALINE, clean water applications.

 

2.    One (1) year from the date of shipment for all other Giant industrial and consumer pumps.

 

3.    Six (6) months from the date of shipment for all rebuilt pumps.

 

4.    Ninety (90) days from the date of shipment for all Giant accessories.

                   

This warranty is limited to repair or replacement of pumps and accessories of which the  manufacturer’s evalu-

ation shows were defective at the time of shipment by the manufacturer.  The following items are NOT covered 

or will void the warranty:

 

1.   Defects caused by negligence or fault of the buyer or third party.

 

2.    Normal wear and tear to standard wear parts.

 

3.   Use of repair parts other than those manufactured or authorized by Giant.

 

4.   Improper use of the product as a component part.

 

5.   Changes or modifications made by the customer or third party.

 

6.   The operation of pumps and or accessories exceeding the specifications set forth in the Opera-

tions Manuals provided by Giant Industries, Inc.

Liability under this warranty is on all non-wear parts and limited to the replacement or repair of those products 

returned freight prepaid to Giant Industries which are deemed to be defective due to workmanship or failure of 

material.  A Returned Goods Authorization (R.G.A.) number and completed warranty evaluation form is required 

prior

 to the return to Giant Industries of all products under warranty consideration.  Call (419)-531-4600 or fax 

(419)-531-6836 to obtain an R.G.A. number.

Repair or replacement of defective products as provided is the sole and exclusive remedy provided hereunder 

and  the  MANUFACTURER  SHALL  NOT  BE  LIABLE  FOR  FURTHER  LOSS,  DAMAGES,  OR  EXPENSES, 

INCLUDING INCIDENTAL AND CONSEQUENTIAL DAMAGES DIRECTLY OR INDIRECTLY ARISING FROM 

THE SALE OR USE OF THIS PRODUCT.

THE LIMITED WARRANTY SET FORTH HEREIN IS IN LIEU OF ALL OTHER WARRANTIES OR REPRESENTA-

TION, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OR MERCHANTABILITY 

OR FITNESS FOR A PARTICULAR PURPOSE AND ALL SUCH WARRANTIES ARE HEREBY DISCLAIMED 
AND EXCLUDED BY THE MANUFACTURER.

 

 

GIANT INDUSTRIES, INC.

, 900 N. Westwood Ave., Toledo, Ohio  43607

PHONE (419) 531-4600, FAX (419) 531-6836, www.giantpumps.com

© Copyright 2018 Giant Industries, Inc.

06/18  P400-22_25mm.indd

Dimensions - P420/P420-0011/P420-0021/P422/P423 and P425 - Inches (mm) 

 

Summary of Contents for P400 Series













Reviews: