6/30
22.11.21, Subject to alterations
Mounting the burner housing on the gas jacket (service position)
10 Mounting the burner housing on
the gas jacket (service position)
Position the burner housing in the gas-jacket hinge
and secure it with a rod. The burner is now in the
service position.
Attach the ignition and ionisation cable to the igni-
tion and ionisation electrodes.
Carefully swing the burner closed.
Do not pinch electrical cables.
Insert the second mounting rod into the hinge. Tight-
en the screw at the top to secure the burner in posi-
tion.
