Subject to alterations, 03.06.20
17/32
Start-up and calibration
Start heat setting
Driving in ignition position
Action button
Display
Description
The
ignition position P0
cannot be set until the
symbols
disappear.
Hold down
A button
a set the value with the
- or
+
button
.
Press
+ button
to confirm.
Ignition ON
Valves ON
Ignition OFF
Flame in start position
When transferring
P1 to P2
for the first time,
CALC
appears briefly
The curve points
P2 to P9
are calculated auto-
matically as a straight line.
Use
+
button
to confirm all curve points up to
curve point P9.
In curve point
P9
, set the excess air for the high
load at the gas train using the adjusting screw
"V" or "large flame"
. The CO
2
value should be
9-10% for natural gas.
Action button
Display
Description
